CSF myelin basic protein
How the test is performed:
A lumbar puncture (spinal tap) is the most common means of collecting a specimen of CSF. You are positioned on your side with your knees curled up to your abdomen and your chin tucked in to your chest. (Occasionally this procedure is performed with the person sitting bent forward). The skin is scrubbed, and a local anesthetic is injected over the lower spine. The spinal needle is inserted, usually between the 3rd and 4th lumbar vertebrae. Once the needle is properly positioned in the subarachnoid space, pressures can be measured and fluid can be collected for testing. After the sample is collected, the needle is removed, the area is cleaned, and a bandage is applied. You will be asked to remain flat, or nearly flat, for 6 to 8 hours after the test.
The sample of at least 3 cc is taken immediately to the laboratory for evaluation.
How to prepare for the test:
Be prepared to sign a consent form and to remain in the hospital for at least the 6 to 8 hours after the test that you must remain flat.
Infants and children:
The physical and psychological preparation you can provide for this or any test or procedure depends on your child's age, interests, previous experience, and level of trust. For specific information regarding how you can prepare your child, see the following topics as they correspond to your child's age:
How the test will feel:
The curled position may be uncomfortable, but you must remain in it to avoid moving the needle and possibly injuring the spinal cord.
The scrub will feel cold and wet. The anesthetic will sting or burn when first injected. There will be a hard pressure sensation when the needle is inserted, and there is usually some brief pain when the needle goes through the meninges. This pain should stop in a few seconds. Overall, discomfort is minimal to moderate. The entire procedure usually takes about 30 minutes but may take longer. The actual pressure measurements and fluid collection only takes a few minutes.
Why the test is performed:
This test is performed to determine if your nervous system shows active myelin breakdown. Multiple sclerosis is the most common cause for myelin breakdown (demyelination), but other causes may include:
|
